Kyocera TASKalfa 420i Operation Manual page 136

Copying Functions
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
Ready to copy.
Combine
Place original.
Original : ---
Zoom :
100%
Paper : ---
Preview
Add Shortcut
Status
4-14
Downloaded from www.Manualslib.com
None
Layout
Off
2 in 1
Right then Left then
Down Down
4 in 1
Down then Down then
Right Left
Cancel
manuals search engine
Solid Dotted
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Combine].
4
Press [2 in 1] or [4 in 1], and choose the page layout
Copies
of Layout.
5
Press [Border Line] to choose the type of the lines
to indicate page boundaries. Press [OK].
None
6
Press [Original Orientation] to choose orientation of
Border Line
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
Top Edge Top
Original
Orientation
7
Press [OK].
OK
08/08/2009 10:10
8
Press the Start key. Copying begins.
If the original is placed on the platen, replace the
original and press the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
Borders
(Cropmark)
OPERATION GUIDE