Kyocera TASKalfa 420i Operation Manual page 97

Ready to send.
Place original.
Destination
ABCD
TUVW
Group1
On Hook Direct
0001
AAA BBB
0006
FFF GGG
Destination
Status
Send to Folder (SMB)/Send to Folder (FTP)
Stores a scanned original image file in the specified shared folder of any PC.
Stores a scanned original image in a folder of an FTP server.
NOTE:
• Refer to Help of your operating system for details on how to share a folder.
• Be sure that SMB Protocol or FTP in the COMMAND CENTER is On. For details, refer to the KYOCERA
COMMAND CENTER Operation Guide.
OPERATION GUIDE
Downloaded from www.Manualslib.com
Detail
To:
abcd@efg.com
10.200.188.120 Auto
1/1
Group1
Chain Detail/Edit Delete Recall
0002 0003 0004 0005 No.
CCC DDD EEE
0007 0008 0009 0010
1/100
HHH III JJJ
Quick Setup Original/Sending Color/
Data Format Image Quality
manuals search engine
6
Check the destination list.
Destination
Select a destination and press [Detail/Edit] to check
Address
Book
and edit it.
E-mail
Addr Entry
Select a destination and press [Delete] to remove
Folder Path
Entry
the destination from the list.
FAX No.
Entry
i-FAX
Addr Entry
NOTE:
When selecting [On] for Entry Check for New
WSD Scan
Destination (page 8-31), the confirmation screen
Advanced
appears. Enter the same destination again and press
Setup
08/08/2009 10:10
[OK].
When selecting [On] for Destination Check before Send
(page 8-30), the confirmation screen appears after
pressing the Start key. For details, refer to Confirmation
Screen of Destinations on page 3-29.
1
Press the Send key.
Displays the screen for sending.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
2
Press [Folder Path Entry] and then [SMB] or [FTP].
NOTE:
Destination can be specified using the
Address Book or the One Touch Keys. For details, refer
to Specifying Destination on page 3-30.
Basic Operation
3
3-25