Kyocera TASKalfa 420i Operation Manual page 82

Basic Operation
XY Zoom
The procedure for using zoom copying is explained below.
Ready to copy.
Zoom
Place original.
Original : ---
Zoom :
400%
Paper : ---
Preview
Add Shortcut
Status
Ready to copy.
Zoom
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
3-10
Downloaded from www.Manualslib.com
Y
X
Copies
(25 - 400)
Standard
Zoom
400 %
Max.
400% 78%
XY Zoom
STMT
200% 77%
# Keys
>>Ledger
STMT 100%
154% 64%
>>Legal
Letter Auto
129% 50%
>>Ledger
Legal
121% 25%
>>Ledger
Cancel
Copies
(25 - 400)
X
Standard
100
Zoom
%
XY Zoom
# Keys
(25 - 400)
Y
100
%
Top Edge Top
Original
Orientation
# Keys
Cancel
manuals search engine
Select vertical and horizontal magnifications
individually. Reduce or enlarge original images in 1%
increments between 25% and 400%.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4
Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed
magnification as desired. You can also enter the
magnification directly using the numeric keys by
Legal
>>Letter
pressing [# Keys].
Ledger
>>Legal
Ledger
When using Preset Zoom, select the key of desired
>>Letter
Ledger magnification.
>>STMT
Min.
When using XY Zoom, press [XY Zoom].
OK
08/08/2009 10:10
Press [+] or [–] to change the displayed
magnifications of X (horizontal) and Y (vertical).
You can also enter the magnification directly using
the numeric keys by pressing [# Keys].
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
OK
08/08/2009 10:10
5
Press [OK].
6
Press the Start key. Copying begins.
OPERATION GUIDE