Adjusting The Lens; Adjusting The Image - Digital Projection E-Vision Laser 4K Series User Manual

Digital Projection E-Vision Laser 4K Series

Adjusting the lens

The lens can be adjusted using the Lens
Lens menu
The menu provides access to the
Lens
allows , and
Lens Control Zoom Focus
Shift Adjustment mode.
Press ENTER/SELECT to switch between the two modes.
Remote control
Use the remote control to adjust zoom, focus and shift directly, without opening a menu:
•
OK enters lens control, then switches between
•
EXIT exits lens control and opens the
•
MENU exits lens control and returns to the main image.
•
The arrow buttons adjust zoom, focus and shift as indicated on the screen.

Adjusting the image

Orientation
•
This can be set from the Setup menu.
Highlight Orientation and choose from
Geometry
•
Settings such as Keystone, Rotation, Pincushion / Barrel and Arc can be set from the Geometry menu.
Picture
•
Settings such as Gamma, Brightness
Installation and Quick-Start Guide
menu, or using the lens buttons on the remote control.
setting and the
Lens Control Lens Center
adjustment using the arrow buttons. The setting operates in
Shift
Zoom/Focus Adjustment
Lens menu.
Front Tabletop , Front Ceiling ,
Contrast , Saturation , Hue and Sharpness can be set from the Image menu.
,
OPERATING THE PROJECTOR
command.
Zoom/Focus Adjustment
and Shift Adjustment .
Rear Tabletop, Rear Ceiling and Auto-front
and
For full details of how to adjust
the lens using the remote control,
see Remote Control
guide.
Setup menu
.
Geometry menu
Image menu
Neither of the settings under Picture
are available with the HDMI 3 and 4
inputs.
Notes
earlier in this
Rev A June 2017
page 17