Digital Projection E-Vision 4500 Specification Sheet

E-Vision 4500 1080p 3D
4,000 ANSI Lumens | Contrast Ratio: 2,000:1 | Part No:115-131
Colour System:
5-segment RYGWB Color Wheel
Display Type:
1 x 0.65" DarkChip™ DMD™

Key Features

Video & Graphics Processing
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom Formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
Synchronisation of active glasses, DLP® Link™ glasses or polarising switcher.
BrilliantColor™ for increased system brightness.
Independent control of hue, saturation and gain for primary and secondary colors.
High Bandwidth Digital & Analog Receiver with 10 Bit A-D.
The projector automatically detects interlaced video and implements 3:2 or 2:2 extraction as appropriate, with
pixel based, motion adaptive interpolation and auto cadence correction.
24p and 1080p native display.
Geometry Correction
Vertical keystone correction.
Source Compatibility:
HDMI including Deep Color™ processing and 3D standards.
DVI with HDCP compliance.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DVI, DisplayPort or VGA.
Component Video (SD and HD) via YPrPb, RGBHV, RGB or RGBS.
S-Video (PAL, NTSC & SECAM)
Composite Video (PAL, NTSC & SECAM)
DMD Specification:
1920 x 1080 pixels native.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16x9
Fill Factor
87%
Specification Sheet