Digital Projection E-Vision Laser 4K Series User Manual page 17

Digital Projection E-Vision Laser 4K Series
LENS adjustment
11
adjust focus.
FOCUS IN / OUT:
press and hold this button, then use the Navigation arrow
SHIFT:
buttons to move the lens.
ZOOM IN / OUT: adjust zoom.
USER PRESET A, B, C, D
12
Load user presets.
13 ALT
Press and hold this button to access alternative functions for all
buttons with a green label.
DVI / DisplayPort2 / numeric input 3
14
There is no DVI input on this projector.
Use with ALT to select the DisplayPort 2 input.
HDMI 2 / HDMI 4 / numeric input 2
15
Select the HDMI 1 input.
Use with to select the HDMI 4 input.
ALT
HDMI 1 / HDMI 3 / numeric input 1
16
Select the HDMI 1 input.
Use with ALT to select the HDMI 3 input.
TEST / SWAP / numeric input 0
17
Show a test pattern. Press again to show the next test pattern:
...Off, White, Black, Red, Green, Blue, CheckerBoard,
CrossHatch, V Burst, H Burst, ColorBar...
When PIP mode is on, use this button with
sub images.
continues on next page...
Installation and Quick-Start Guide
REMOTE CONTROL
11
12
ALT to swap the main and
EXIT INFO
FREEZE RE-SYNC
LENS
FOCUS ZOOM
IN IN
SHIFT
OUT OUT
USER PRESET
A B C D
HDMI1 HDMI2 DVI ALT
1 2 3
ALT
HDMI3 HDMI4 DisplayPort2
DisplayPort1 HD-T 3GSDI
ADDR
4 5 6
R G B ALL
VGA COMP1 COMP2 TEST
7 8 9 0
3D EYE PIP SWAP
Remote control
Notes
3D is only available on the HDMI 3
and 4 inputs.
This projector does not use the
following options on the remote:
DVI, VGA, COMP 1 and COMP 2.
13
14
15
16
17
Rev A June 2017
page 9