Booting The Dvr And Basic Time Setting; Setting Daylight Saving Time - Vitek VT-HD2x8 User Manual

Booting the DVR and Basic Time Setting

1. During the first start up, the following message will be displayed.
2. After the system initializing is completed, select the language and set date and time as specified below.

Setting Daylight Saving Time

If the DVR is to be set Day Light Saving Time and be synchronized NTP (Network Time Protocol), take next steps.
1. Enter the SETUP mode. The default Password is "1111".
2. Go to SETUP>SYSTEM>SET DATE & TIME
3. Select DAYLIGHT SAVING.
8