Configuring Routing Between Pes - HP 10500 Series Configuration Manual

Step
1. Enter system view.
2. Enable BGP and enter BGP
view.
3. Enter BGP-VPN view.
4. Configure the CE as the VPN
EBGP peer.
5. Create and enter BGP-VPN
IPv6 unicast address family
view.
6. Enable IPv6 unicast route
exchange with the specified
peer or peer group.
7. Redistribute the routes of the
local CE.
8. (Optional.) Configure filtering
of redistributed routes.
9. (Optional.) Configure filtering
of received routes.
Configure the CE:
2.
Step
1. Enter system view.
2. Enter BGP view.
3. Configure the PE as an EBGP
peer.
4. Create and enter BGP IPv6
unicast address family view.
Enable IPv6 unicast route
5.
exchange with the specified
peer or peer group.
6. (Optional.) Configure route
redistribution.

Configuring routing between PEs

Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name |
ipv6-address } as-number
as-number
ipv6-family [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
Command
system-view
bgp as-number
peer { group-name |
ipv6-address } as-number
as-number
ipv6-family [ unicast ]
peer { group-name | ip-address }
enable
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
187
Remarks
N/A
N/A
N/A
By default, no BGP peer is
configured.
Configuration commands in
BGP-VPN IPv6 unicast address
family view are the same as those
in BGP IPv6 unicast address family
view. For details, see Layer 3—IP
Routing Configuration Guide.
By default, BGP does not exchange
IPv6 unicast routes with any peer.
A PE must redistribute the routes of
the local CE into its VPN routing
table so that it can advertise them
to the peer PE.
By default, BGP does not filter
redistributed routes.
By default, the PE does not filter
received routes.
Remarks
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP does not exchange
IPv6 unicast routes with any peer.
A CE must advertise its VPN routes
to the connected PE so that the PE
can advertise them to the peer CE.