Displaying And Maintaining Mpls L3Vpn - HP 10500 Series Configuration Manual

Step
4. Configure a BGP peer or peer
group.
5. Enable the BGP AS number
substitution function.

Displaying and maintaining MPLS L3VPN

You can use soft-reset or reset BGP connections to apply new BGP configurations. Soft reset requires that
BGP peers have route refresh capability (supporting Route-Refresh messages).
Task
Soft reset BGP VPNv4 connections.
Reset BGP VPNv4 connections.
Use the following commands to display MPLS L3VPN:
Task
Display the routing table for a VPN
instance. For more information
about this command, see Layer
3—IP Routing Command
Reference.
Display information about a
specified or all VPN instances.
Display the FIB of a VPN instance.
Display FIB entries that match the
specified destination IP address in
the specified VPN instance.
Display BGP VPNv4 peer group
information.
Display BGP VPNv4 peer
information.
Display BGP VPNv4 routes.
Command
peer { group-name | ip-address }
as-number as-number
peer { ip-address | group-name }
substitute-as
Command
refresh bgp { ip-address | all | external |
group group-name | internal } { export |
import } vpnv4 [ vpn-instance
vpn-instance-name ]
reset bgp { as-number | ip-address | all |
external | internal | group group-name }
vpnv4 [ vpn-instance vpn-instance-name ]
Command
display ip routing-table vpn-instance
vpn-instance-name [ statistics | verbose ]
display ip vpn-instance [ instance-name
vpn-instance-name ]
display fib vpn-instance vpn-instance-name
display fib vpn-instance vpn-instance-name
ip-address [ mask | mask-length ]
display bgp group vpnv4 [ vpn-instance
vpn-instance-name ] [ group-name ]
display bgp peer vpnv4 [ vpn-instance
vpn-instance-name ] [ group-name log-info |
ip-address { log-info | verbose } | verbose ]
display bgp routing-table vpnv4
[ route-distinguisher route-distinguisher ]
[ network-address [ { mask | mask-length }
[ longest-match ] ] ]
120
Remarks
N/A
By default, BGP AS number
substitution is disabled.
For more information about this
command, see Layer 3—IP Routing
Command Reference.
Remarks
Available in user view.
Available in user view.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.