HP 10500 Series Configuration Manual page 258

[CE2-Vlan-interface10] quit
Verify the configuration
# Display L2VPN PW information on PE 1. The output shows that two LDP PWs have been established.
<PE1> display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 1 up, 1 blocked, 0 down, 0 defect
Xconnect-group Name: vpna
Peer
2.2.2.2
3.3.3.3
# Display detailed information about the primary and backup PWs on PE 1.
<PE1> display l2vpn pw verbose
Xconnect-group Name: vpna
Connection: ldp
Peer: 2.2.2.2
Signaling Protocol
Link ID
In Label
Wait to Restore Time: 0 sec
MTU
PW Attributes
Tunnel Group ID
Tunnel NHLFE IDs
Peer: 3.3.3.3
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
Tunnel Group ID
Tunnel NHLFE IDs
# Display L2VPN PW information on PE 2. The output shows that an LDP PW has been established.
[PE2] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpna
Peer
1.1.1.1
# Display L2VPN PW information on PE 3. The output shows that an LDP PW has been established.
[PE3] display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 1, 1 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: vpna
PW ID In/Out Label
20 65662/65660
30 65659/65655
PW ID: 20
: LDP
: 1
: 65662
: 1500
: Main
: 0x1800000760000005
: 133
PW ID: 30
: LDP
: 1
: 65659
: 1500
: Backup
: 0x1800000860000006
: 135
PW ID In/Out Label
20 65650/65662
Proto Flag
LDP M
LDP B
PW State : Up
Out Label: 65660
PW State : Blocked
Out Label: 65655
Proto Flag
LDP M
252
Link ID State
1 Up
1 Blocked
Link ID State
1 Up