HP 10500 Series Configuration Manual page 40

Step
1. Enter system view.
2. Enter BGP view.
3. Configure the MCE as the
EBGP peer.
4. Create and enter BGP IPv6
address family view.
5. Enable BGP to exchange IPv6
unicast routing information
with the EBGP peer.
6. (Optional.) Redistribute the
IGP routes of the VPN.
Configuring IBGP between an IPv6 MCE and a VPN site
To run IBGP between an IPv6 MCE and IPv6 VPN sites, you must configure a BGP peer for each IPv6
VPN instance on the IPv6 MCE, and redistribute the IGP routes of each VPN instance on the IPv6 VPN
sites.
Configure the IPv6 MCE:
1.
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance view.
4. Specify an IPv6 BGP peer in
an AS.
5. Create and enter BGP-VPN
IPv6 address family view.
6. Enable BGP to exchange IPv6
unicast routing information
with the IPv6 BGP peer.
7. Redistribute remote site routes
advertised by the PE.
8. (Optional.) Configure a
filtering policy to filter
advertised routes.
9. (Optional.) Configure a
filtering policy to filter
received routes.
Configure the VPN site:
2.
Command
system-view
bgp as-number
peer ipv6-address as-number
as-number
ipv6-family [ unicast ]
peer ipv6-address enable
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Command
system-view
bgp as-number
ip vpn-instance vpn-instance-name
peer { group-name |
ipv6-address } as-number
as-number
ipv6-family [ unicast ]
peer { group-name |
ipv6-address } enable
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
34
Remarks
N/A
N/A
By default, no BGP peer is
configured.
N/A
By default, BGP cannot exchange
IPv6 unicast routing information
with a peer.
By default, BGP does not
redistribute routes from any other
routing protocol.
A VPN site must advertise the IPv6
VPN network addresses it can
reach to the connected IPv6 MCE.
Remarks
N/A
N/A
N/A
N/A
N/A
By default, BGP cannot exchange
IPv6 unicast routing information
with a peer.
By default, BGP does not
redistribute routes from any other
routing protocol.
By default, the IPv6 MCE does not
filter advertised routes.
By default, the IPv6 MCE does not
filter received routes.