Configuring A Vsi; Configuring A Pw; Configuring A Pw Class; Configuring A Static Pw - HP 10500 Series Configuration Manual

Step
4. Configure match criteria for
the service instance.

Configuring a VSI

Step
1. Enter system view.
2. Create a VSI and enter VSI
view.
3. (Optional.) Configure a
description for the VSI.
4. Configure an MTU for the VSI.
5. (Optional.) Enable the VSI.

Configuring a PW

Configuring a PW class

In a PW class, you can configure PW attributes such as the PW type. To simplify PW configuration, you
can configure PWs with the same attributes by referencing the same PW class.
To configure a PW class:
Step
1. Enter system view.
2. Create a PW class and enter
PW class view.
3. Specify the PW type.

Configuring a static PW

Command
•
Match all incoming packets:
encapsulation default
•
Match incoming packets with
any VLAN ID or no VLAN ID:
encapsulation { tagged |
untagged }
•
Match incoming packets with a
specific VLAN ID:
encapsulation s-vid vlan-id
[ only-tagged ]
Command
system-view
vsi vsi-name
description text
mtu mtu
undo shutdown
Command
system-view
pw-class class-name
pw-type { ethernet | vlan }
270
Remarks
Use one of the commands.
By default, no match criteria are
configured for the service instance.
Remarks
N/A
By default, no VSI is created.
By default, no description is
configured for a VSI.
By default, the MTU of a VSI is
1500 bytes.
By default, a VSI is enabled.
Remarks
N/A
By default, no PW class is created.
By default, the PW type is VLAN.