Acura 3.5 RL Manual page 564

17. Connect the transmission range switch connector,
then install the clamp to the harness bracket.
CLAMP
18. Install a new set ring in the extension shaft groove.
SET RING
EXTENSION SHAFT
HARNESS
BRACKET
TRANSMISSION RANGE
SWITCH CONNECTOR
19. Install the extension shaft using the special tool as
shown.
NOTE: Push the extension shaft in the secondary
driven gear shaft until the extension shaft stops.
EXTENSION SHAFT
INSTALLER
07MAF-PY40101
20. Remove the special tool.
21. Fill the opening between the secondary driven gear
shaft and the extension shaft with High Temp Urea
Grease (P/N 08798 - 9002), as shown.
SUPER HIGH TEMP UREA GREASE
(P/N 08798-9002)
12-14 g (0.4-0.5 oz)
SET RING
EXTENSION
SHAFT