Glass Adjustment - Acura 3.5 RL Manual

Doors

Glass Adjustment

NOTE:
Place the vehicle on a firm, level surface when adjust-
ing the glass.
Check the weatherstrips and glass run channel for dam-
age or deterioration, and replace them if necessary.
1. Remove:
• Door panel (see pages 20-4, 20-11)
• Plastic cover (see pages 20-2, 20-9)
2. Raise the glass fully.
3. Loosen the glass mounting bolts and regulator mount-
ing bolts.
4. Push the glass rearward (front door glass) or for-
ward (rear door glass).
Glass mounting bolt
locations.
Front:
Rear:
GLASS
REGULATOR
Regulator mounting
bolt locations.
GLASS
REGULATOR
5. Tighten the glass mounting bolts and regulator
mounting bolts.
6. Loosen the front channel mounting bolts or rear
channel mounting bolts.
7. Lower the glass.
8. Push the front channel or rear channel against the
glass, then tighten each mounting bolt.
Front and rear
channel mounting
bolt locations
Front:
Rear:
GLASS
REAR
CHANNEL
GLASS
FRONT
CHANNEL