Acura 3.5 RL Manual page 952

Removal — '99 - 01 Models
CAUTION: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
NOTE: Take care not to scratch the console panel, rear console, front seat, and related parts.
Disassemble in numbered sequence.
Bolt, screw locations
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
A/T GEAR POSITION
INDICATOR TRIM
Disconnect the seat
heater switch connectors
and indicator light bulb
socket.
CONSOLE PANEL
Disconnect the cigarette
lighter connector.
INDICATOR LIGHT
BULB SOCKET
CIGARETTE
LIGHTER
CONNECTOR
HOOK
Installation is the reverse of the removal procedure.
NOTE:
If necessary, replace any damaged clips.
Make sure the wire harnesses are not pinched.
Make sure the connectors and bulb socket are connected properly.
SEAT HEATER
SWITCH
SEAT HEATER
(driver's)
SWITCH
(passenger's)
HOOKS
CONNECTORS
BEVERAGE
HOLDER
BULB SOCKET HARNESS
Clip locations
HOOKS
CLIP
ACCESSORY
POWER SOCKET
BEVERAGE
HOLDER TRAY
Disconnect the beverage holder
bulb socket.
BEVERAGE HOLDER
REAR CONSOLE
Disconnect the accessory
power socket, and detach
the harness clip.
REAR HEATER
COVER