Reassembly - Acura 3.5 RL Manual

Reassembly

CAUTION:
• The bearing support is made of aluminum. Be careful not to damage it when servicing.
• Do not damage the lip on the inner and outer seals during installation.
NOTE: Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber
parts with solvent.
INTERMEDIATE SHAFT
BEARING SUPPORT
O-RING
Replace.
INNER SEAL
Replace.
Pack the lip of the
inner seal.
INTERMEDIATE SHAFT
BEARING
Replace.
INTERNAL
SNAP RING
EXTERNAL
SNAP RING
OUTER SEAL
Replace.
Pack the lip of the
outer seal.
SET RING
Replace.