Inner Fender, Fenderwell Trim - Acura 3.5 RL Manual

Inner Fender, Fenderwell Trim, Rear Fender Cover,
and Rear Air Outlet
Removal
NOTE: If necessary, replace any damaged clips
Inner fender:
: Bolt, screw locations
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
: Clip locations, 11
Fenderwell trim/Rear fender cover/Rear air outlet:
NOTE:
Take care not to bend the fenderwell trim.
Before installing the fenderwell trim, clean the body
bonding surface with a sponge dampened in alcohol.
After cleaning, keep oil, grease, or water from getting
on the surface.
To remove the rear fender cover, first remove the rear
wheel (see section 18).
To remove the rear fender cover, first pull out the front
edge of the rear bumper (see page 20-74).
To remove the rear air outlet, first remove the rear
bumper (see page 20-74).
: Bolt, screw locations
Left, 3
Right, 2
6 x 1.0 mm
9.8 N-m (1.0 kgf-m,
7.2 Ibf-ft)
: Clip locations
CLIP
REAR
GROMMET
BUMPER
REAR FENDER
COVER
STEEL
CORE
ADHESIVE
FENDERWELL
TRIM
Left side only.
INNER FENDER
FENDERWELL
TRIM
REAR AIR
OUTLET
Rear bumper
outline
REAR FENDER
COVER
HOOKS