Belt Inspection And Adjustment - Acura 3.5 RL Manual

Alternator Belt Inspection and Adjustment
NOTE: When using a new belt, first adjust the deflection
or tension to the values for the new belt, then readjust
the deflection or tension to the values for the used belt
after running engine for 5 minutes.
Deflection method:
Apply a force of 98 N (10 kgf, 22 Ibf), and measure the
deflection between the alternator and crankshaft pulley.
Deflection:
Used Belt: 9.5 - 11.5 mm (0.37 - 0.45 in)
New Belt: 7.0 - 8.0 mm (0.28 - 0.31 in)
NOTE: If the belt is worn or damaged, replace it.
Belt tension gauge method:
Attach the belt tension gauge to the belt and measure the
tension. Follow the gauge manufacturer's instructions.
Tension:
Used Belt: 390 - 590 N (40 - 60 kgf, 88 - 130 Ibf)
New Belt: 780 - 980 N (80 - 100 kgf, 180 - 220 Ibf)
NOTE: If the belt is worn or damaged, replace it.
BELT TENSION GAUGE
07JGG-001010A