Power Steering Hoses, Lines
Fluid Leakage Inspection
HOSES and LINES
• Inspect hoses for damage, leaks, interference and
twisting.
• Inspect fluid lines for damage, rusting and leakage.
• Inspect for leaks at hose and line joints and connec-
tions.
Replacement
NOTE:
• Connect each hose to the corresponding line securely
until it contacts the stop on the line. Install the clamp
or adjustable clamp at the specified distance from the
hose end as shown.
• Add the recommended power steering fluid to the
specified level on the reservoir and check for leaks.
ADJUSTABLE HOSE CLAMP: (a)
• Position the adjustable hose clamps at the points indi-
cated by (a) in the drawing above.
• Slide the hose over the line until it contacts the stop.
CAUTION: Check all clamps for deterioration or defor-
mation, replace with the clamps new ones of necessary.
HOSE CLAMP: (b)
• Position hose clamps at the points indicated by (b) in
the drawing above.
• Slide the hose over the line until it contacts the stop.