Acura 3.5 RL Manual page 545

Pressure Testing
• While testing, be careful of the rotating front wheels.
• Make sure lifts, jacks and safety stands are placed properly (see
CAUTION:
• Before testing, be sure the transmission fluid is filled to the proper level.
• Warm up the engine before testing.
1. Raise the front of the vehicle, and support it with safety stands.
2. Set the parking brake, and block rear wheels securely.
3. Allow the front wheels to rotate freely.
4. Warm up the engine (the radiator fan comes on), then stop and connect a tachometer.
5. Connect the special tool to line pressure inspection hole.
TORQUE: 18 N-m (1.8 kgf-m, 13 Ibf-ft)
CAUTION: Connect the oil pressure gauge securely, be sure not to allow dust and other foreign particles to enter the
inspection hole.
LINE PRESSURE
INSPECTION HOLE
A/T OIL PRESSURE GAUGE
SET W/PANEL
07406-0020400
A/T LOW PRESSURE
GAUGE W/PANEL
07406-0070300
section 1).
A/T PRESSURE HOSE
ADAPTER
07MAJ-PY40120
(4 Required)
A/T PRESSURE HOSE,
2210 mm
07MAJ-PY4011A
(4 Required)