Valve Body Unit Reassembly
Assist control valve unit:
1.
Coat the housing seal with power steering fluid, and
install it in the groove of the valve housing.
Then install the valve body.
2.
Install the valve springs.
3.
Coat the pressure control valve and assist control
valve with power steering fluid, then install them
into the valve body.
4.
Coat the cap seal with power steering fluid, and
install the it in the groove of the cap.
5.
Install the cap on the valve body.
Valve body unit:
6.
Apply power steering fluid to the seal ring lip of the
valve oil seal, then install the seal in the valve hous-
ing using a hydraulic press and the special tools as
shown.
CAUTION: Install the valve oil seal with its grooved
side facing the tool.
ATTACHMENT,
32 x 35 mm
07746-0010100
DRIVER
07749-0010000