Acura 3.5 RL Manual page 107

9. Remove the transmission stop collar, then remove
the exhaust pipe A.
SELF-LOCKING NUT
8 x 1.25 mm
22 N-m (2.2 kgf-m, 16 Ibf-ft)
Replace.
GASKET
Replace.
EXHAUST
PIPE A
SELF-LOCKING NUT
10 x 1.25 mm
54 N-m (5.5 kgf-m,
40 Ibf-ft)
Replace.
10 x 1.25 mm
38 N-m (3.9 kgf-m,
28 Ibf-ft)
10. Remove the front mount mounting bolts (see
section 5).
11. Attach the chain hoist to the engine (see
12. Remove the left engine mount bracket.
12 x 1.25 mm
54 N-m (5.5 kgf-m,
40 Ibf-ft)
GASKETS
Replace.
SELF-LOCKING NUT
10 x 1.25 mm
54 N-m (5.5 kgf-m,
40 Ibf-ft)
Replace.
TRANSMISSION STOP
COLLAR
section
12 x 1.25 mm
64 N-m (6.5 kgf-m,
47 Ibf-ft)
LEFT ENGINE
MOUNT BRACKET
12 x 1.25 mm
54 N-m (5.5 kgf-m, 40 Ibf-ft)
13. Disconnect the starter cable and BLK/WHT wire, then
remove the starter.
8 x 1.25 mm
8.8 N-m (0.9 kgf-m,
6.5 Ibf-ft)
BLK/WHT
WIRE
10 x 1.25 mm
44 N-m (4.5 kgf-m, 33 Ibf-ft)
14. Install in the reverse order of removal.
NOTE: When installing the starter cable, make sure
that the crimped side of the ring terminal is facing
5).
out.
15. Enter the anti-theft code for the radio, then enter the
customer's radio station presets.
10 x 1.25 mm
STARTER 44 N-m (4.5 kgf-m, 33 Ibf-ft)
CABLE
STARTER
NUT
Crimped side of ring
terminal
TERMINAL