Acura 3.5 RL Manual page 728

9. Coat the O-ring with power steering fluid, and
install it into the grooves in the side plate.
10. Install the side plate on the cam ring by aligning the
roller set holes in the side plate with the rollers.
11. Coat the O-ring with power steering fluid, and posi-
tion it into the pump housing.
12. Install the pump cover assembly in the pump housing.
13. Coat the flow control valve with power steering
fluid.
14. Install the flow control valve and spring on the pump
housing.
15. Coat the O-ring with power steering fluid, and
install it on the flow control valve cap.
16. Install the flow control valve cap on the pump hous-
ing, and tighten it.
17. Coat the O-ring with power steering fluid, and install
it into the grooves in the inlet joint.
18. Install the inlet joint on the pump housing.