Vega VEGAPULS 63 Operating Instructions Manual page 73

Ʋ Aluminium/Stainless steel housing
Input variable
Measured variable
Fig. 47: Data of the input variable
1 Reference plane
2 Measured variable, max. measuring range
3 Utilisable measuring range
Standard electronics
Max. measuring range
Recommended measuring range
Ʋ Flange DN 50, 2"
Ʋ Flange DN 80, 3"
Electronics with increased sensitivity
Max. measuring range
Flange DN 50, 2"
Flange DN 80, 3"
Output variable
Output
Ʋ Physical layer
VEGAPULS 63 • Modbus and Levelmaster protocol
50 Nm (36.88 lbf ft)
The measured quantity is the distance between the
end of the sensor antenna and the product surface. The
reference plane for the measurement is the lower side of
the flange.
35 m (114.8 ft)
up to 15 m (49.21 ft)
up to 35 m (114.8 ft)
75 m (246.1 ft)
up to 15 m (49.21 ft)
up to 35 m (114.8 ft)
Digital output signal according to standard EIA-485
11 Supplement
1
3
2
73