8.2
Parameter adjustment .................................................................................................... 60
8.3
9
9.1
Maintenance .................................................................................................................. 62
9.2
9.3
9.4
Rectify faults ................................................................................................................... 66
9.5
9.6
Software update ............................................................................................................. 70
9.7
10.1 Dismounting steps.......................................................................................................... 71
10.2 Disposal ......................................................................................................................... 71
11.1 Technical data ................................................................................................................ 72
11.2 Basics Modbus............................................................................................................... 79
11.3 Modbus register ............................................................................................................. 80
11.4 Modbus RTU commands ............................................................................................... 83
11.5 Levelmaster commands ................................................................................................. 86
11.7 Dimensions .................................................................................................................... 94
11.9 Trademark .................................................................................................................... 101
VEGAPULS 63 • Modbus and Levelmaster protocol
Safety instructions for Ex areas
Take note of the Ex specific safety instructions for Ex applications.
These instructions are attached as documents to each instrument
with Ex approval and are part of the operating instructions manual.
Editing status: 2017-07-07
Contents
3