Member (Zone Alias View) - HP 6127XLG Blade Series Command Reference Manual

zone-alias zone-alias-name: Specifies an existing zone alias, a case-sensitive string of 1 to 64 characters.
A zone alias name can contain English letters (uppercase and lowercase), numbers, and special
characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an English
letter.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
The role can be configured for a member only in enhanced zoning mode. The role of a member takes
effect only after the Pairwise feature is enabled.
You can also use this command to change the role (initiator, target, or both) of a member.
If the role of a member is specified by using the same identifier (FC address, pWWN, fWWN, or zone
alias) multiple times, the role of the member is the role most recently specified.
If the role of a member is specified by using different identifiers multiple times, the role of the member is
the union of the specified roles. For example, if a member is specified as an initiator by using its FC
address and specified as a target by using its pWWN, the member acts as both an initiator and a target.
Examples
# Create zone z1 and enter its view.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1]
# Add an N_Port with the FC address 010000 to zone z1 as an initiator.
[Sysname-vsan1-zone-z1] member fcid 010000 initiator
# Add an N_Port with the pWWN 01:02:03:04:05:06:07:08 to zone z1 as a target.
[Sysname-vsan1-zone-z1] member pwwn 01:02:03:04:05:06:07:08 target
# Change the role of the N_Port with pWWN 01:02:03:04:05:06:07:08 back to both initiator and
target.
[Sysname-vsan1-zone-z1] member pwwn 01:02:03:04:05:06:07:08
# Add an F_Port with fWWN 08:07:06:05:04:03:02:01 to zone z1 as both an initiator and a target.
[Sysname-vsan2-zone-z1] member fwwn 08:07:06:05:04:03:02:01
# Add zone alias za1 (existing) to zone z1.
[Sysname-vsan1-zone-z1] member zone-alias za1
Related commands
display zone
•
display zone member
•
pairwise-zoning enable
•
zone name
•
• zone-alias name

member (zone alias view)

Use member to add a member to a zone alias.
Use undo member to remove a member from a zone alias.
84