<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset name zs1
[Sysname-vsan1-zoneset-zs1] quit
# Create zone set zs1 by copying zone set zs2.
[Sysname-vsan1] zoneset clone zs1 zs2
Related commands
•
display zoneset
zoneset name
•
zoneset distribute
Use zoneset distribute to trigger a complete distribution, distributing both the active zone set and zone
database.
Syntax
zoneset distribute
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
After activating a zone set by using the zoneset activate command, you can modify the zone database
configuration. The zoneset distribute command distributes the active zone set and the modified zone
database to the entire fabric without changing the active zone set.
If the distribution fails, the system prints a log message. To ensure zone data consistency across the fabric,
perform a new distribution.
Examples
# Trigger a complete distribution.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zoneset distribute
zoneset distribute full
Use zoneset distribute full to set the zone distribution and merge type to complete.
Use undo zoneset distribute full to restore the default.
Syntax
zoneset distribute full
undo zoneset distribute full
99