Display Npv Status - HP 6127XLG Blade Series Command Reference Manual

Table 32 Command output
Field
Server Interface
External interface
FCID
Port WWN
Entries
Total entries

display npv status

Use display npv status to display the status information of interfaces in VSANs.
Syntax
display npv status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays the status information of interfaces in all VSANs. On an FCF-NPV switch, this
command displays the status information of only VSANs operating in NPV mode.
Usage guidelines
Only NPV and FCF-NPV switches support this command.
The status information of each interface includes the VSAN tagging mode, interface state, and FC
address.
Examples
# Display the status information of interfaces in VSAN 1.
<Sysname> display npv status vsan 1
External Interfaces:
Interface: Vfc2
VSAN
1
Interface: Vfc3
VSAN
1
Number of External Interfaces: 2
Description
Name of the downlink interface.
Name of the uplink interface mapped by the downlink interface.
FC address of the node.
Port WWN of the node connected to the NPV switch.
Number of logged-in nodes for a VSAN.
Total number of logged-in nodes.
VSAN tagging mode: Tagging
State FCID
Up 0x010002
VSAN tagging mode: Tagging
State FCID
Up 0x010001
103