<Sysname> system-view
[Sysname] interface FortyGigE 1/1/2
[Sysname-FortyGigE1/1/2] fip-snooping port-mode fcf
FCS commands
fcs discovery start
Use fcs discovery start to start a topology discovery in VSANs.
Syntax
fcs discovery start [ age interval ] vsan vsan-list
Views
System view
Predefined user roles
network-admin
Parameters
age interval: Specifies the aging time for the topology discovery information, in the range of 300 to
86400 seconds. The default is 900 seconds.
vsan vsan-list: Specifies a VSAN by its ID or a range of VSANs in the form of vsan-id to vsan-id. The value
range for the vsan-id argument is 1 to 3839.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
Examples
# Start a topology discovery in VSAN 1 through VSAN 100.
<Sysname> system-view
[Sysname] fcs discovery start vsan 1 to 100
Related commands
•
display fcs database
display fcs discovery status
•
display fcs ie
•
display fcs port
•
fcs discovery stop
Use fcs discovery stop to stop the topology discovery.
Syntax
fcs discovery stop vsan vsan-list
Views
System view
115