Display Fcs Discovery Status - HP 6127XLG Blade Series Command Reference Manual

Predefined user roles
network-admin
Parameters
vsan vsan-list: Specifies a VSAN by its ID or a range of VSANs in the form of vsan-id to vsan-id. The value
range for the vsan-id argument is 1 to 3839.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
Examples
# Stop the topology discovery in VSAN 1 through VSAN 100.
<Sysname> system-view
[Sysname] fcs discovery start vsan 1 to 100
Related commands
fcs discovery start

display fcs discovery status

Use display fcs discovery status to display the topology discovery status.
Syntax
display fcs discovery status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command display the topology discovery status in all VSANs.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
Examples
# Display the topology discovery status in all VSANs.
<Sysname> display fcs discovery status
VSAN Discovery Status
1 inProgress
2 completed
3 localOnly
Related commands
• fcs discovery start
fcs discovery stop
•
116