Pairwise-Zoning Enable - HP 6127XLG Blade Series Command Reference Manual

Hide thumbs Also See for 6127XLG Blade Series:
Table of Contents

Advertisement

pairwise-zoning enable

Use pairwise-zoning enable to enable the Pairwise feature for a zone.
Use undo pairwise-zoning enable to disable the Pairwise feature for a zone.
Syntax
pairwise-zoning enable
undo pairwise-zoning enable
Default
The Pairwise feature is disabled for a zone.
Views
Zone view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
The Pairwise feature can be configured only in enhanced zoning mode. The Pairwise feature runs on a
per-zone basis. For the Pairwise feature to take effect, you must reactivate the active zone set after
enabling the Pairwise feature.
The following roles are defined for zone members:
Initiator—Typically a server.
Target—Typically a storage device.
You can specify the role of a member as an initiator, a target, or both when adding the member. A
member can have different roles in different zones.
When the Pairwise feature is disabled for a zone, member roles do not take effect in that zone.
When the Pairwise feature is enabled for a zone:
An initiator member can access target members.
A target member can access initiator members.
A member acting as both an initiator and a target can access both target members and initiator
members.
The Pairwise feature status is distributed to the entire fabric when you configure the zoneset activate or
zoneset distribute command.
Examples
# Enable the Pairwise feature for zone z1.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] zone name z1
[Sysname-vsan2-zone-z1] pairwise-zoning enable
Related commands
member (zone view)
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents