Rscn Aggregation Timer - HP 6127XLG Blade Series Command Reference Manual

Syntax
rscn aggregation enable
undo rscn aggregation enable
Default
RSCN aggregation is disabled.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
For multiple change events occurring within the RSCN aggregation timer, RSCN aggregation allows the
switch to put the FC addressees of multiple nodes with changes in a single RSCN. This feature reduces
the number of RSCNs sent to the concerned registered nodes.
HP recommends that you enable RSCN aggregation and set the same RSCN aggregation timer value on
all switches in a VSAN.
Examples
# Enable RSCN aggregation in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] rscn aggregation enable
Related commands

rscn aggregation timer

rscn aggregation timer
Use rscn aggregation timer to set the RSCN aggregation timer.
Use undo rscn aggregation timer to restore the default.
Syntax
rscn aggregation timer time
undo rscn aggregation timer
Default
The RSCN aggregation timer is 2000 milliseconds.
Views
VSAN view
Predefined user roles
network-admin
Parameters
time: Specifies the RSCN aggregation timer value in the range of 100 to 2000 milliseconds.
45