HP 6127XLG Blade Series Command Reference Manual page 10

When you bind a VFC interface to an S-channel interface or S-channel aggregate interface, follow these
restrictions and guidelines:
To successfully bind a VFC interface to an S-channel interface or S-channel aggregate interface,
•
make sure the switch is operating in expert mode. For information about system operating modes,
see Fundamentals Configuration Guide. For information about S-channel interfaces and S-channel
aggregate interfaces, see EVB Configuration Guide.
To successfully bind a VFC interface to an S-channel interface, make sure the Layer 2 Ethernet
•
interface associated with the S-channel interface has FCoE over S-channel capabilities. For
FCoE-capable cards and cards that have FCoE over S-channel capabilities, see the product
manual.
To successfully bind a VFC interface to an S-channel aggregate interface, make sure all member
•
ports of the Layer 2 Ethernet aggregate interface associated with the S-channel aggregate interface
have FCoE over S-channel capabilities. Also, make sure new member ports of the Layer 2 Ethernet
aggregate interface have FCoE over S-channel capabilities. Otherwise, FCoE traffic might be
blocked. For FCoE-capable cards and cards that have FCoE over S-channel capabilities, see the
product manual.
• The binding to an S-channel aggregate interface does not take effect when you perform the
following tasks:
Bind one VFC interface to the S-channel aggregate interface.
Bind another VFC interface to a member port of the Layer 2 aggregate interface associated
with the S-channel aggregate interface.
FCoE over S-channel can be used only between an EVB-capable switch and a server.
•
Examples
# Bind interface VFC 4 to interface FortyGigE 1/1/1 and FCoE MAC address 000c-2999-eacd.
<Sysname> system-view
[Sysname] interface vfc 4
[Sysname-Vfc4] bind interface FortyGigE 1/1/1 mac 000c-2999-eacd
# Bind interface VFC 5 to interface Bridge-aggregation 1 and FCoE MAC address 000c-2888-eacd.
<Sysname> system-view
[Sysname] interface vfc 5
[Sysname-Vfc5] bind interface bridge-aggregation 1 mac 000c-2888-eacd
# Bind interface VFC 6 to interface S-Channel 1/0/1:10 and FCoE MAC address 000c-2999-eacd.
<Sysname> system-view
[Sysname]interface vfc 6
[Sysname-Vfc6] bind interface s-channel 1/0/1:10 mac 000c-2999-eacd
# Bind interface VFC 7 to interface Schannel-Aggregation 1:10 and FCoE MAC address
000c-2666-eacd.
<Sysname> system-view
[Sysname]interface vfc 7
[Sysname-Vfc7] bind interface schannel-aggregation 1:10 mac 000c-2666-eacd
Related commands
display fcoe
•
display interface vfc
•
5