Display Zone - HP 6127XLG Blade Series Command Reference Manual

display zone

Use display zone to display zone information.
Syntax
display zone [ [ name zone-name ] vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name zone-name: Specifies a zone name, a case-sensitive string of 1 to 64 characters. A zone name can
contain English letters (uppercase and lowercase), numbers, and special characters dollar sign ($),
minus sign (-), caret (^), and underscore (_), and it must start with an English letter.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
If you specify both name zone-name and vsan vsan-id, this command displays information about a
single zone in a VSAN.
If you specify only vsan vsan-id, this command displays information about all zones in the specified
VSAN.
If you specify neither option, this command displays information about all zones in all VSANs.
Examples
# Display information about all zones in all VSANs.
<Sysname> display zone
VSAN 1:
fcid 0x111111 initiator
fcid 0x222222 target
pwwn 11:11:11:11:22:22:22:22
fwwn 02:0e:30:30:33:33:32:35
zone name z2
fcid 0x111111
zone-alias name za1
fcid 0x333333 initiator
VSAN 2:
VSAN 3:
Table 25 Command output
Field
fcid
pwwn
Description
FC address of the zone member.
pWWN of the zone member.
73