Zone Default-Zone Permit - HP 6127XLG Blade Series Command Reference Manual

[Sysname] vsan 1
[Sysname-vsan1] zone name z1
[Sysname-vsan1-zone-z1] quit
# Create zone z2 by copying z1.
[Sysname-vsan1] zone clone z1 z2
Related commands
display zone
•
zone name
•

zone default-zone permit

Use zone default-zone permit to allow members in the default zone to access each other.
Use zone default-zone permit to deny members in the default zone from accessing each other.
Syntax
zone default-zone permit
undo zone default-zone permit
Default
Members in the default zone cannot access each other.
Views
VSAN view
Predefined user roles
network-admin
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
In enhanced zoning mode, the switch distributes the default zone policy with other zone data during a
distribution process. In basic zoning mode, you must manually configure a consistent default zone policy
across the fabric.
When the switch performs a zoning mode switchover, it also distributes the default zone policy with other
zone data.
In enhanced zoning mode, a zone merge requires that the default zone policy is the same on all
participating switches. Otherwise, the merge fails, and the links between the switches are isolated.
Examples
# Allow members in the default zone to access each other.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone default-zone permit
Related commands
display zone status
•
zone mode enhanced
•
zoneset activate
•
90