Fcoe Fcmap - HP 6127XLG Blade Series Command Reference Manual

Syntax
fcoe fcf-priority priority
undo fcoe fcf-priority
Default
The FCF priority of a VFC interface is 128.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
priority: Specifies the FCF priority for the VFC interface, in the range of 0 to 255. The smaller the value,
the higher the priority.
Usage guidelines
This command takes effect only on VFC interfaces operating in F mode. You can configure this command
on VFC interfaces operating in E mode, but it does not take effect.
The VFC interface FCF priority is used in the fcf priority field in an unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
Examples
# Set the FCF priority to 12 for interface VFC 1.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fcoe fcf-priority 12

fcoe fcmap

Use fcoe fcmap to set an FC-MAP value.
Use undo fcoe fcmap to restore the default.
Syntax
fcoe fcmap fc-map
undo fcoe fcmap
Default
The FC-MAP value is 0x0EFC00.
Views
System view, VLAN view
Predefined user roles
network-admin
Parameters
fc-map: Specifies an FC-MAP value in the range of 0x0EFC00 to 0x0EFCFF.
16