Display Npv Status - HP 6125XLG Command Reference Manual

Field
Total entries

display npv status

Use display npv status to display the status of the NPV switch.
Syntax
display npv status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If no VSAN is specified, this
command displays the status of the switch in all VSANs.
Usage guidelines
You can use this command to display the status of each interface in VSANs, including VSAN tagging
mode, interface state, and FC address.
This command is available only when the switch is operating in NPV mode.
Examples
# Display the status of the NPV switch in VSAN 1.
<Sysname> display npv status vsan 1
External Interfaces:
Interface: Vfc1
VSAN
1
Number of External Interfaces: 1
Server Interfaces:
Number of Server Interfaces: 0
# Display the status of the NPV switch in all VSANs.
<Sysname> display npv status
External Interfaces:
Interface: Vfc1
VSAN
1
Number of External Interfaces: 1
Server Interfaces:
Description
Total number of logged-in nodes.
VSAN tagging mode: Tagging
State FCID
Down
VSAN tagging mode: Tagging
State FCID
Down
81