Menu Control - OSEE BCM-156-3HSV User Manual

Network Control

6.2 Menu Control

Open the management interface as shown in Figure 6.2-1, the menu items
listed in the left part are almost as the same as the main menu items.
As shown in Figure 6.2-1, the management interface is divided into the
following parts:
Input Source Selection Button
1.
It is used to selecting an input source as the input signal, such as: SDI1,
SDI2, LINE1, LINE2(CVBS), HDMI. The selecting box of "Apply to All"
at the right side is used to synchronize the settings for all the other kinds
of input sources.
Navigation menu list
2.
It shows the navigation menus: STATUS, ADJUST, VIDEO DISPLAY,
INPUT SETUP, MARKER, AUDIO, DISPLAY, CLOSE CAPTION,
CONFIG, COLOR TEMPERATURE, FUNCTION KEY, GPI, IMD and
SYSTEM. Click the navigation menu, it will show the corresponding
settings on the right side. The menu items in main menu on screen
display are mostly as the same as the menu items listed in navigation
menus except SYSTEM, ADJUST and VIDEO DISPLAY.
Figure 6.2-1 Management Interface
80