OSEE BCM-156-3HSV User Manual page 53

In PBP mode, it displays the WFM or Audio Meter only for the signal of
the current picture. The current picture is labeled by a triangle, as
shown in Figure 5.1-26, at the bottom center of the picture. You can
select the current picture by the WIN SELECT command assigned to a
function key.
When the main picture is set as the current picture, and the WFM is set
as displayed, the WFM could only be displayed at the left bottom of the
screen, as shown in Figure 5.1-26, and meantime, the Audio Meter will
be display only at the top position (Top left or Top right) at the screen in
case of collision.
Figure 5.1-26 Position Relationship of WFM and the Current Picture
When the slave picture is set as the current picture, and the WFM is set
as displayed, the WFM could only be displayed at the right bottom of the
screen, as shown in Figure 5.1-27, and meantime, the Audio Meter will
be display only at the top position (Top left or Top right) at the screen in
case of collision.
Figure 5.1-27 Position Relationship of WFM and the Current Picture
(2) Set Display Mode
The selection for picture & picture display mode contains the following
items: OFF, PBP, PIP, you can switch the selection as instructed below:
 Method 1: By menu item.
Select the menu item Config SUB IN TYPE, use ENTER, UP or
DOWN key to select a display mode.
Functionality of the Main Menu
Main Slave
Picture Picture
47