Audio Menu - OSEE BCM-156-3HSV User Manual

 The AREA MARKER, CENTER MARKER and SAFETY MARKER feature
are available only when the MARKER item is set to ON.
 The safety marker area will change with the area marker.
 The cross hatch lines will display only in the single image or in PIP mode
when CROSS HATCH is ON.

5.1.4 AUDIO Menu

The AUDIO menu items are used to adjust the audio parameters, the
menu items are as shown in Figure 5.1-12:
MAIN
STATUS
INPUT SELECT
MARKER
AUDIO
DISPALY
CLOSED CAPTION
CONFIG
COLOR TEMP
FUNCTION KEY
GPI
IMD
KEY INHIBIT
The relationship of Items, Default Value, Domain Range and Description
of the sub-item is shown in Table 5.1-4:
Table 5.1-4 The Description of AUDIO Menu Items
Default
Items
Value
AUDIO
EBD
SOURCE
AUDIO SOURCE
SPEAK OUT L
SPEAK OUT R
AUDIO METER
METER SELECT
METER DIRECTION
METER POSITION
METER DIS MODE
REF LEVEL
OVER LEVEL
Figure 5.1-12 AUDIO Menu
Domain Range
 EBD: embedded signal
 AUDIO1: external
signal1
 AUDIO2: external
signal2
35
Functionality of the Main Menu
AUDIO
AUDIO1
EBD CH1
EBD CH1
OFF
CH1-2
HORIZONTAL
TOP
MODE1
-20dB
-10dB
Description
Select the audio source.
When there is no sync in
and the input signal is
not HDMI/SDI1/SDI2,
you can select only