Color Temp Menu - OSEE BCM-156-3HSV User Manual

Functionality of the Main Menu
Figure 5.1-30 Entering the Auto Standby Mode
When detecting no signal input or signal disappeared, the power
indicator will be lit in flash green for 10 seconds, and showing the
standby prompt, after that, the monitor screen will be turned off, and it
will be in auto standby mode, the POWER indicator is lit in green. Then,
if the signal input is correct, the monitor screen will be lit up
automatically.
 OFF: AUTO STANDBY is set to OFF to disable the auto standby
mode.
Press POWER button when the monitor is in operation mode, it will
power off the monitor, otherwise, press POWER button when the
monitor is off, thus it will power on the monitor, and the POWER
indicator is lit in green.
 The length of LOCK NUMBER is up to 8 characters, you can use the
combination of these characters: number (0 to 9) and letter (A to Z). Press
ENTER to edit the LOCK NUMBER, than use UP or DOWN to select
characters, than press ENTER to go to next character, press MENU to exit
editor.

5.1.8 COLOR TEMP Menu

The COLOR TEMP menu items are used to adjust the color temperature
parameters and the color balance, the menu items are as shown in Figure
5.1-31:
50