OSEE BCM-156-3HSV User Manual page 19

BCM Features
Figure 4.1-3 Correspondence between Source Menu and Interface
 When the monitor is set as PIP/PBP display mode, set the signal source
for the main picture by INPUT button, and refer to "5.1.7 CONFIG Menu"
for the settings about the signal source for the slave picture.
F1
2.
This button is a FUNCTION button. The function can be set via the
FUNCTION menu. Open the FUNCTION menu after the first time, the
selected function will remain.
 OPERATION: Press F1 to display the function menu list in the center
of the screen, as shown in Figure 4.1-4. Toggle F1 button to change
the value related to this function.
FUNCTION
F1 SCAN
F2 NATIVE
F3 ASPECT
F4 WIN SELECT
F5 PBP
Figure 4.1-4 Function Menu List
13
NORMAL
OFF
4:3
MAIN
OFF