Table of Contents
Advertisement
Network Control
6.2 Menu Control
Open the management interface as shown in Figure 6.2-1, the menu items
listed in the left part are almost as the same as the main menu items.
As shown in Figure 6.2-1, the management interface is divided into the
following parts:
Screen selection button
1.
It is used to switch between the two screens at the top of the working
area. Click "Monitor 1" to show the parameter values set in screen No.1,
and click "Monitor 2" to show the parameter values set in screen No. 2.
For a RMM1024 device, "Monitor 1" is corresponding to screen No.1, and
"Monitor 2" is corresponding to screen No.2. Select a monitor before you
set or check the parameters for it.
Figure 6.2-1 Management Interface
50
Advertisement
Table of Contents
