User Control Sub-Menu; User Config Sub-Menu - OSEE RMD9024 User Manual

5.6 USER CONTROL Sub-menu

PARAMETERS
CVBS
SCAN O
1
SD ASPECT O
H/V DELAY X
2
COLOR BAR O
1. For "SD ASPECT" parameter:
SD ASPECT: The screen Aspect Ratio. The screen Aspect Ratio value: 4:3 and 16:9.
When the HD-SDI signal input, it will display in 16:9 by default.
Type/ input signal
RMD9024-HSC HD-SDI input signal
（16:9 screen）
SD-SDI input signal
CVBS input signal
RMD9024-SC
SD-SDI input signal
（16:9 screen）
CVBS input signal
RMD9024-V
CVBS input signal
（16:9 screen）

"：Available ； "
"
2. For "Color bar" parameter：
When opening the color bar, the screen information will be covered by the color bar for one minute.
The color bar also can be canceled by pressing the ∧button，∨ button ,"ENTER" button or
"MENU" button.
5.7

USER CONFIG Sub-menu

PARAMETERS
CVBS
VECTOR REF O
OSD CONTROL O
—20—
RMD9024 LCD MONITOR
Input Signal
SD-SDI HD-SDI
O O
O X
O O
O O
SD ASPECT function
-
" Not available.
Input Signal
SD-SDI HD-SDI
O O
O O
Domain Range
NORMAL...UNDER SCAN
4:3...16:9
OFF...H...V...H/V
ON...OFF
16:9 4:3
- -
 
 
 
 
 
Domain Range
100% CB Used to set the reference value of the
...75% CB vectorscope.
 100% CB: 100% color bar
 75% CB: 75% color bar
ON...OFF Except STATUS, it controls the switch
of all OSD
User Manual
NOTE
Used to adjust the image
display scale.
 NORMAL: 95%
 UNDER SCAN:100%
Used to adjust the screen
Aspect Ratio.
Used to observe the horizontal
and vertical sync signals at the
same time.
NOTE