OSEE BCM-156-3HSV User Manual page 67

Figure 5.1-35 TSL Server and Display Monitor
We recommend the following two methods according to the different interface
of TSI-3000 which is selected to connect with BCM-156.
METHOD1
Use the COM7~COM12 interface of TSI-3000 to connect
with BCM-156
 Cable1
Use Cable1 to connect one of the COM7~COM12 interface at the rear
panel of TSI-3000 with the RS485 Interface of BCM-156, the functionality
of the interfaces are as shown in the following table.
 RS485(BCM-156): RJ45
Use the RS485 interface to connect with TSI-3000, the RS485 uses the
RJ45 connector, and the function of RS485 interface of BCM-156 is
defined as in Table 5.1-17:
Table 5.1-17 The Pins Input/output connectors for RS485 of BCM-156
RS485 IN Terminal
PIN No.
Signal
1,2 GND
3 Tx-
4 Rx+
5 Rx-
6 Tx+
Functionality of the Main Menu
RS485 OUT Terminal
Signal
GND
Tx-
Rx+
Rx-
Tx+
61
Illustration