Display Menu - OSEE BCM-156-3HSV User Manual

 The prerequisite for the available settings of the display mode and the
position of audio meter is that the AUDIO METER is ON.

5.1.5 DISPLAY Menu

The DISPLAY menu items are used to adjust the parameters displayed on
the screen, the menu items are as shown in Figure 5.1-17:
MAIN
STATUS
INPUT SELECT
MARKER
AUDIO
DISPALY
CLOSED CAPTION
CONFIG
COLOR TEMP
FUNCTION KEY
GPI
IMD
KEY INHIBIT
The relationship of Items, Default Value, Domain Range and Description
of the sub-item is shown in Table 5.1-5:
Table 5.1-5 The Description of DISPLAY SETUP Menu Items
Default
Items
Value
STATUS
AUTO
DISPLAY
STATUS DISPLAY
AFD DISPLAY
WAVE FORM TYPE
LINE WAVE
LINE WAVE NUMBER
WAVE OVER LIMIT
WAVE UNDER LIMIT
WFM TRANS
WFM POSITION
TIME CODE
Figure 5.1-17 DISPLAY SETUP Menu
Domain Range Description
OFF/ON/AUTO
Functionality of the Main Menu
DISPLAY
Set whether to display STD
information.
If the signal input is not equal to
"No signal" and this item is auto,
the status information will show
15 seconds when the status
changed,
automatically.
39
AUTO
OFF
WAVE FORM
OFF
---
50
0
OPAQUE
LEFT
OFF
and then closed