are the compared area whose luminance is beyond the reference level,
and the edges are displayed in the pointed color.
For example, set the FOCUS COLOR as RED, and set the FOCUS
LEVEL as 80, the compared results are as shown Figure 5.1-8:
Figure 5.1-8 Illustration for FOCUS ASSIST Function
LUMA ZOOM CHECK
2.
The LUMA ZOOM CHECK function is used to display images on the
screen with a zebra pattern to adjust the camera exposure parameter. It
will compare the signal luminance with the LUMA ZOOM LEVEL, and fill
the relevant image area whose luminance is higher than the LUMA ZOOM
LEVEL with a zebra pattern.
For example, set the LUMA ZOOM LEVEL as 80, the compared results
are as shown in Figure 5.1-9, the special area is filled with a zebra pattern.
Figure 5.1-9 Illustration for LUMA ZOOM CHECK Function
Select input source format for LINE2: For the LINE2(CVBS) interface, the
LINE2(Y/C) interface and the LINE2(YPSPR) interface share the same
group of physical interfaces, select the signal source format for LINE2
according to the line connection mode. When select a signal source format
for LINE2, you can set the menu item INPUT SELECTLINE2 as CVBS,
LINE2(Y/C) or LINE2(YPBPR), in addition, press INPUT button to pop up
Functionality of the Main Menu
31