OSEE BCM-156-3HSV User Manual page 52

Functionality of the Main Menu
Figure 5.1-23 The Size for the Slave Picture
In PIP mode, it displays the WFM or Audio Meter only for the signal
source of the main picture, and if the WFM is set as displayed, the
Audio Meter will be display only at the top position(Top left or Top right)
at the screen. For example, the WFM displays at the bottom left, and
the Audio Meter could be only displayed at the top position in case of
collision, as shown in Figure 5.1-24:
Figure 5.1-24 The Illustrate for WFM and Audio Meter Display
 PBP(Picture by Picture)
The two pictures generated by two input signals separately are
displayed side by side, and this function helps with white balance
adjustment, and determining shooting angles between two cameras etc.
In PBP mode, the size of the main picture is as large as the slave
picture's, and the position relationship of the main picture and the slave
picture is as shown Figure 5.1-25:
Figure 5.1-25 PBP Mode
46