Chapter 4 Using The Rmd9024; Status Display Of The Screen - OSEE RMD9024 User Manual

Chapter 4 Using the RMD9024

4.1 Status Display of the Screen

Input Signal
format
Safe Marker
Audio Meters
Speakers
1. LED Tally Light: This tri-color (red/green/amber) light is controlled through a DB9
connector on the rear panel. For more information about the DB9 connector, refer to
"Rear Panel" on Chapter 4.4.
2. Input Signal Format: It displays the input signal format and can be set in the MAIN
Menu.
3. Safe Areas: Multiple safe areas are configurable in the
4. Audio Meters: Levels for the audio. For RMD9024-SC and RMD9024-V, only two
meters on the left side.
5. UMD: The MAIN Menu provides settings to customize the
text area to show a line of characters, numbers, and/or some symbols.
6. Speakers: Audio may be selected for monitoring through the left and right speakers.
7. Time Code: The de-embedded time code from the HD/SD-SDI source displays in the
top right corner.
Waveform and Vectorscope: The signal waveform and vectorscope are configurable
8.
in the
MAIN Menu
User Manual for RM7023
LED Tally Light
OSD Tally
.
Waveform or Vectorscope
UMD Time Code
.
MAIN Menu
(In-Monitor Display)
UMD
- 5 -