Display Menu - OSEE LCM215-E Series User Manual

Menu Operations
 The prerequisite for the available settings of the display mode and the position of
audio meter is that the AUDIO METER is ON.

4.1.5 DISPLAY Menu

The DISPLAY menu items are used to set your status information, wave form, vector,
line wave, AFD and time code preference displayed on the screen, the menu items
are as shown in Figure 4.1-16:
STATUS
INPUT SELECT
MARKER
AUDIO
DISPLAY
CLOSED CAPTION
CONFIG
LOOK PROFILE
FUNCTION KEY
KEY INHIBIT
The relationship of Items, Default Value, Domain Range and Description of the
sub-item is as shown in Table 4.1-5:
Table 4.1-5 The Description of DISPLAY SETUP Menu Items
Default
Items
Value
STATUS
AUTO
DISPLAY
AFD
OFF
DISPLAY
MAIN
STATUS DISPLAY
AFD DISPLAY
WAVE FORM TYPE
WAVE OVER LIMIT
WAVE UNDER LIMIT
WFM TRANS
WFM POSITION
TIME CODE
Figure 4.1-16 DISPLAY SETUP Menu
Domain Range
OFF/ON/AUTO
OFF/ON
DISPLAY
Description
Set whether to display Status
information,
resolution and frame rate of the
source.
Set whether to activate AFD
information.
ON is an effective value to AFD
DISPLAY item only if the value of
STATUS DISPLAY is AUTO or
36
AUTO
OFF
WAVE FORM
50
0
OPAQUE
LEFT
OFF
including the